grimme

RH 20 / RH 24

hopper

The Grimme VARITRON 470 is a self-propelled 4-row potato harvester with up to 460 HP, a 7-tonne NonstopBunker, and Grimme’s GentleFlow concept that carries the full crop width through the machine before gently dividing at the rear axle to minimize tuber damage. Hydrostatic single-wheel drive, a premium comfort cab with ErgoDrive controls, and the SmartView camera system round out a flagship machine built for high-output potato operations.

PRODUCT SPECIFICATIONS

Technical Details

All figures, data and facts about this machine. Standard equipment, dimensions, performance and much more.

Key Specifications

Application & Design
  • Machine Type: Trailed receiving hopper for potato and vegetable storage operations
  • Primary Use: Crop intake from trailers or trucks, soil separation, and transfer to downstream storage or grading lines
  • Receiving Area: 10′ 2″ (3.1 m) wide across all models with unloading sensors that signal the driver for optimum positioning
  • Hopper Floor: Standard “lower bend” design for maximum intake volume and rapid trailer emptying; straight hopper floor available on request

Crop Protection
  • PU Spiral Rollers: Soft, wear-resistant polyurethane rollers deliver effective soil separation with minimal crop impact; prevent jammed stones and entangled haulm
  • Hopper Floor Surface: Soft polyurethane sections cover the side panels and hopper floor strips for maximum crop protection during intake
  • Remain Control: Measures the remaining crop layer in the receiving area and automatically shuts off the hopper and downstream conveyors when crop drops below a set height — the remaining layer cushions incoming crop to reduce drop damage

Operation & Control
  • IBX 300 ISOBUS Terminal: Intuitive operator unit for controlling all hopper functions with built-in assistance systems
  • Capacity Control: Sensors detect crop layer height and hopper floor speed; throughput is displayed on the terminal for optimum storage line utilisation without manual readjustment
  • Flow Control: Coordinated start-stop sequencing of the entire storage line; can be triggered by any connected Grimme device (receiving hoppers, store loaders, or box-fillers)

Maintenance & Visibility
  • Hopper Floor Chain Lubricator: Mechanical or electrical automatic oiler eliminates manual lubrication of the hopper floor chain
  • Visual Windows: Front-section windows and freely accessible connections and operating elements for clear sightlines during operation

Available Options & Configurations

  • MultiSep Unit (RH 24): 2.4 m wide separation unit with four pairs of rollers for removing loose soil, clods, small stones, haulm, and weeds while maintaining high throughput
  • Presentation Belt / PB (RH 24): Straight hopper floor with presentation belt for vegetable operations growing multiple crop types
  • XT Transfer Belt (RH 24): Full-width 2.4 m transfer belt downstream of the spiral roller package for straight crop flow up to 140 t/h; optional inspection platform for quality monitoring
  • VarioFlow Transfer Rollers: Independently height-adjustable rollers that run at an angle to the crop cross conveyor for improved crop distribution, throughput, and protection
  • Turbo Clean: Cleaning system that accelerates rollers in the opposite direction to crop flow using centrifugal force to remove sticky soil and prevent accumulation in storage
  • Straight Hopper Floor: Alternative to the standard lower-bend design, available on request
  • Fold-Out Platform: Right-hand-side platform for safe visual inspection into the front section of the hopper
  • Electrical Hopper Floor Chain Oiler: Upgrade from the mechanical lubricator for fully automatic chain lubrication
  • Unloading Sensors: Green-to-red positioning signal for approaching trailers and trucks for faster, more precise unloading
MyGrimme Telematics box.
technology

Discover MY GRIMME®

Stay Connected. Stay in Control.
myGRIMME is your gateway to GRIMME’s digital ecosystem, designed to bring all essential machine data, services, and insights together in one intuitive platform. With free access, growers can monitor machine activity, review live information, and streamline operations through automatic documentation of tasks and process data.

 

Why Use myGRIMME?

  • Live machine insights for smarter decision‑making.
  • Automatic task documentation to simplify record‑keeping.
  • All digital services in one place for easier machine management.
  • Clear operational overviews to improve efficiency.
Learn more
GRIMME | RH 20 / RH 24

Detailed Specifications

RH 20 / 24 RH 20‑45 RH 20‑60 RH 24‑45 RH 24‑60 S RH 24‑60 RH 24‑70
Intake
Intake height – min. (in.) 35.4" 35.4" 35.4" 35.4" 35.4" 38.4"
Intake height – max. (in.) 47.2" 47.2" 47.2" 47.2" 47.2" 50.2"
Intake width (ft. in.) 10' 2" 10' 2" 10' 2" 10' 2" 10' 2" 10' 2"
Intake width – XXL version (ft. in.) ○ 11' 6" 11' 6" 11' 6"
Hopper floor width (ft. in.) 6' 7" 6' 7" 7' 10" 7' 10" 7' 10" 7' 10"
Hopper floor length (ft. in.) 14' 9" 19' 8" 14' 9" 19' 8" 19' 8" 23' 0"
Hopper floor speed (m/min) 0.5 – 5 0.5 – 5 0.5 – 5 0.5 – 5 0.5 – 5 0.5 – 5
Reduced hopper floor speed (m/min) ○ 0.2 – 5 0.2 – 5 0.2 – 5 0.2 – 5 0.2 – 5
Increased hopper floor speed (m/min) ○ 0.5 – 6 0.5 – 6 0.5 – 6 0.5 – 6
Capacity (m³) 10 19 11 15 20 22
Capacity – XXL version (m³) ○ 12 16 21 23
Soil cleaning / pre‑grading
Width (ft. in.) 6' 7" 6' 7" 7' 10" 7' 10" 7' 10" 7' 10"
Number of coils – standard 6 6 8 8 8 8
Number of coils – C8 ○ 8 8
Number of coils – CF ○ 8 + 6 8 + 6 8 + 6 8 + 6 8 + 6 8 + 6
Number of coils – CFF ○ 8 + 6 + 6 8 + 6 + 6
Coil distance – C6 standard (mm) 5 – 45 5 – 45
Coil distance – C8 ○ (mm) 5–25 / 5–55 5–25 / 5–55 5–25 / 5–55 5–25 / 5–55 5–25 / 5–55 5–25 / 5–55
Coil distance – CF cleaning ○ (mm) 5 – 35 5 – 35 5 – 35 5 – 35 5 – 35 5 – 35
Coil distance – CFF cleaning ○ (mm) 5 – 35 5 – 35
Coil distance – CF pre‑grading ○ (mm) 5 – 65 5 – 65 5 – 65 5 – 65 5 – 65 5 – 65
Coil distance – CFF 1st pre‑grading ○ (mm) 5 – 55 5 – 55
Coil distance – CFF 2nd pre‑grading ○ (mm) 5 – 65 5 – 65
Discharge
Throughput (t/h) ~ 80 ~ 90 ~ 100 ~ 100 ~ 120 ~ 120
Conveyor
Soil cross conveyor width (in.) 25.6" / 31.5" 25.6" / 31.5" 31.5" 31.5" 31.5" 31.5"
Pre‑grading cross conveyor width – CF ○ (in.) 31.5" 31.5" 31.5" 31.5" 31.5" 31.5"
Crop cross conveyor width (in.) 25.6" / 31.5" 25.6" / 31.5" 31.5" 31.5" 31.5" 31.5"
Cross conveyor length (ft. in.) 9' 10" 9' 10" 9' 10" 9' 10" 9' 10" 9' 10"
Cross conveyor length ○ (ft. in.) 11' 6" 11' 6" 11' 6" 11' 6" 11' 6" 11' 6"
Discharge height – soil cross conveyor C8 ○ (in.) 49.2" 49.2" 49.2" 49.2" 49.2" 49.2"
Discharge height – soil cross conveyor CF ○ (in.) 39.4" 39.4" 39.4" 39.4" 39.4" 39.4"
Discharge height – soil cross conveyor CFF ○ (in.) 39.4" 39.4" 39.4" 39.4" 39.4" 39.4"
Discharge height – pre‑grading cross conveyor (in.) 49.2" 49.2" 49.2" 49.2" 49.2" 49.2"
Discharge height – crop cross conveyor (in.) 49.2" 49.2" 49.2" 49.2" 49.2" 49.2"
Power supply
Voltage 400 V 400 V 400 V 400 V 400 V 400 V
Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Output – C6 standard (kW) 11 15
Power – C8 standard (kW) 11 15 15 15
Power – C8 ○ (kW) 11 15
Power – CF ○ (kW) 15 15 15 15 15 15 + 5.5
Power – CFF ○ (kW) 15 + 7.5 15 + 7.5 15 + 7.5

● Standard     ○ Optional     — Not available

CHOOSE YOUR MODEL

Featured Premium Pre-Owned Equipment

It does not always have to be new
  • used 2021 SPUDNIK 991 other equipment for sale at HJV Equipment Grand Falls, NB
    $461,000.00
    2021 SPUDNIK 991
    Grand Falls, NB
  • used 2024 GRIMME GL660 planters for sale at HJV Equipment Grand Falls, NB — exterior front
    $225,000.00
    2024 GRIMME GL660
    Grand Falls, NB
  • used 2019 MIEDEMA MS4000 planters for sale at HJV Equipment Charlottetown, PEI — exterior front
    $65,000.00
    2019 MIEDEMA MS4000
    Charlottetown, PEI
  • used 2020 GRIMME GL660 planters for sale at HJV Equipment Grand Falls, NB — exterior front
    $140,000.00
    2020 GRIMME GL660
    Grand Falls, NB
  • $40,000.00
    2004 SPUDNIK 6140
    Grand Falls, NB
  • $20,000.00
    2013 UNDERHAUG UP3760
    Grand Falls, NB
  • $310,000.00
    2018 SPUDNIK 6630
    Charlottetown, PEI
  • used 2015 SPUDNIK 8060 planters for sale at HJV Equipment Grand Falls, NB — exterior front
    $109,000.00
    2015 SPUDNIK 8060
    Grand Falls, NB
  • View All

    Find an HJV location near you today!

    We take pride in helping you find your dream agriculture equipment. Locate your nearest HJV equipment dealer and explore a wide range of New and Pre-Owned equipment.
    Find your nearest HJV Equipment location.
    Enter your postal code or address in the field below to see which locations can best serve you.
    GRIMME VARITRON Front View Cutout